-
Gate Valves
View Products
Water Control Valves
View Products
Butterfly Valves
View Products
Check Valves
View Products
Y-Filter
View Products
Exhaust Valves
View Products
BS5163 Z45X-Blind rod soft seal gate valve
BS5163 Z45X-Roughly soft seal gate valve
Z45X-Gland copper female soft seal gate valve
BS5163 Z45X-Heavy duty soft seal gate valve
BS5163 Z41X- Open stem soft seal gate valve
CFZ45X-Magnetic lock soft seal gate valve
Directly buried soft seal gate valve
BS5163/DIN3352 F4 Z945X-Electric soft seal gate valve
German standard F4- electric pallet soft seal gate valve
German standard F4- blind rod soft seal gate valve
German standard concealed rod hard sealed gate valve
De indicated pole protection gate valve
304 stainless steel soft seal gate valve
F100X-Remote-controlled float ball valve
Y200X-Adjustable pressure reducing valve
H300X-Slow closed check valve
X500X-Pressure relief valve
600X-Electric control valve
800X-Differential pressure bypass valve
Water blow off valve
Slow closed check valve
Adjustable pressure reducing valve
304 stainless steel water control valve series -
-
-
-
H300X-Slow closed check valve
Contact HENGYA for Shipping, delivery, and payments information.
Products Category
Tag list
- 产品描述
-
Product Overview
The H300X slow closing check valve consists of a hydraulic control connecting system consisting of a main valve, one-way valve, needle valve, ball valve, etc. By utilizing hydraulic automatic operation, the main valve can achieve the optimal opening or closing speed. To prevent the occurrence of water hammer and achieve the effect of slow closing and noise reduction, this valve is controlled by hydraulic force and does not require other devices or energy. The product is widely used in water supply network systems such as high-rise buildings and residential areas, as well as urban water supply projects.
Product Features
1. The valve consists of a main valve, a one-way valve, a needle valve, a ball valve, a pressure gauge, etc. As one-way valves, needle valves, pressure gauges, etc. need to be connected to the main valve through pipes, they are collectively referred to as a conduit control system.
2. The valve is controlled by hydraulic self force and does not require other devices or energy. It is easy to maintain and has smooth opening and slow closing.
3. The valve body adopts a full channel and streamlined design, with low fluid resistance and high flow rate.
Working Principle
When the valve supplies water from the inlet end, the water enters the main valve control room through the needle valve one-way valve, and then flows through the valve guide pipe to discharge downstream. Due to the small opening of the needle valve, i.e. the drainage speed of the main valve control room is greater than the inlet speed, the pressure in the control room decreases. The inlet pressure acting on the lower end of the main valve disc opens the main valve to supply water downstream.
When the pipeline stops supplying water, if the downstream water begins to flow back, a portion of the return water enters the main valve control room through the guide pipe. Due to the action of the one-way valve, the return water cannot flow out of the main valve control room, causing the main valve control room to gradually increase pressure and slowly close the main valve.
Main Technical Parameters
Nominal pressure PN
1.0MPa
1.6MPa
2.5MPa
Shell experimental pressure
1.5MPa
2.4MPa
3.75MPa
Sealing test pressure
1.1MPa
1.76MPa
2.75MPa
Maximum inlet pressure
1.0MPa
1.6MPa
2.5MPa
Adjustable range of outlet pressure
0.09-0.8MPa
0.10-1.2MPa
0.15-1.6MPa
Temperature
0℃-80℃
Applicable Medium
Water
Installation And Adjustment
1. One backup, one use installation method should be adopted to avoid the system from not functioning properly after the valve malfunctions;
2. The inlet end of the valve should be equipped with a filter to prevent blockage of magazine particles from causing the valve to malfunction;
3. The closing time of the main valve should not be too slow, otherwise it will cause the water pump and motor to reverse and damage them.
4. Do not open the needle valve too wide.
Contact Us
H300X-Slow closed check valve
Contact HENGYA for Shipping, delivery, and payments information.
Share to
Products Category
Tag list
Related Products
Your One Stop, One Solution!
Each optimal solution is determined by its particular application requirements, design, and installation parameters combined with our experience and know-how on valve industry technology.
CONTACT US
Email: lh@sfvalves.cn, sc@sfvalves.cn
WhatsApp: 8619358036990, 8619358022290
Phone: +86-13932786363, +86-18632765063
Address：No. 4 Road, Industrial Development Zone, Botou City, Hebei Province, China