-
Gate Valves
View Products
Water Control Valves
View Products
Butterfly Valves
View Products
Check Valves
View Products
Y-Filter
View Products
Exhaust Valves
View Products
BS5163 Z45X-Blind rod soft seal gate valve
BS5163 Z45X-Roughly soft seal gate valve
Z45X-Gland copper female soft seal gate valve
BS5163 Z45X-Heavy duty soft seal gate valve
BS5163 Z41X- Open stem soft seal gate valve
CFZ45X-Magnetic lock soft seal gate valve
Directly buried soft seal gate valve
BS5163/DIN3352 F4 Z945X-Electric soft seal gate valve
German standard F4- electric pallet soft seal gate valve
German standard F4- blind rod soft seal gate valve
German standard concealed rod hard sealed gate valve
De indicated pole protection gate valve
304 stainless steel soft seal gate valve
F100X-Remote-controlled float ball valve
Y200X-Adjustable pressure reducing valve
H300X-Slow closed check valve
X500X-Pressure relief valve
600X-Electric control valve
800X-Differential pressure bypass valve
Water blow off valve
Slow closed check valve
Adjustable pressure reducing valve
304 stainless steel water control valve series -
-
-
-
F100X-Remote-controlled float ball valve
Contact HENGYA for Shipping, delivery, and payments information.
Products Category
- 产品描述
-
Product Introduction
The 100X remote-controlled float valve uses the pressure of the medium itself as the power source to drive the valve to automatically adjust and control the hydraulic control valve of the upper and lower liquid levels in the water tank. Its function is to control the liquid level to reach the upper limit of the water tank, close the control valve, and stop supplying water to the water tank; When the water level reaches the lower limit, the control valve opens and automatically supplies water to the water tank. The height of the upper and lower liquid levels can be adjusted freely within the effective depth range of the water tank. A backup float device is installed below the overflow port of the water tank to prevent water overflow during maintenance or malfunction.
Working Principle
When the pipeline supplies water from the inlet end, as the needle valve, ball valve, and float valve are normally open, water enters the water tank through the needle valve, control room, ball valve, and float valve. At this time, no pressure is formed in the control room, and the main valve is opened to supply water to the water tank.
When the written height of the water tank rises to the set height, the floating ball rises and closes the floating ball valve, controlling the increase in indoor water pressure, pushing the main valve to close, and the water supply stops. When the water level drops, the float valve reopens, the control room water pressure drops, and the main valve opens again to continue supplying water, maintaining the set height of the liquid level.
Main Technical Parameters
Nominal pressure
(MPa)Shell experimental pressure
(MPa)Sealing test pressure
(MPa)Applicable Medium Medium temperature
（℃）1.0 1.5 1.1 Water 0-80 1.6 2.4 1.76 Water 0-80 2.5 3.75 2.75 Water 0-80 4.0 6.0 4.4 Water 0-80 Application Description
F100X remote-controlled float valve is a hydraulic operated valve that combines multiple functions. To be installed at the inlet of a water tank or elevated water tower, when the water level reaches the set height, the main valve is controlled by a float valve to close the inlet and stop supplying water; When the water level drops, the main valve, together with the float switch, controls the opening of the water inlet to inject water into the water tank, achieving automatic replenishment. Accurate liquid level control, not affected by water pressure interference; The 100X remote-controlled floating ball valve can be installed at any position according to the height and usage space of the water tank. It is easy to maintain, debug, and inspect, with reliable sealing and long service life.
Installation And Requirements
1. The remote control float valve should be installed on the inlet pipeline of the water tank or water tank, preferably horizontally, with the valve cover facing upwards. The control conduit and float ball should meet the following requirements.
A. The remote control float valve control conduit should be fully fixed on the pool or water tank, and the total length of the control conduit should not exceed 8cm. The center of the float valve should be 1cm away from the water inlet or the inlet pipe should be equipped with a wave suppression device.
There should be anti backflow air holes in the same water tank or above the overflow water level.
Contact Us
F100X-Remote-controlled float ball valve
Contact HENGYA for Shipping, delivery, and payments information.
Share to
Products Category
Related Products
Your One Stop, One Solution!
Each optimal solution is determined by its particular application requirements, design, and installation parameters combined with our experience and know-how on valve industry technology.
CONTACT US
Email: lh@sfvalves.cn, sc@sfvalves.cn
WhatsApp: 8619358036990, 8619358022290
Phone: +86-13932786363, +86-18632765063
Address：No. 4 Road, Industrial Development Zone, Botou City, Hebei Province, China