8619358036990

8619358022290

sc@sfvalves.cn

lh@sfvalves.cn

GET A QUOTE

HENGYA HENGYA

language
  • Electric control valve
  • Electric control valve
  • Electric control valve
  • Electric control valve
  • Electric control valve
Electric control valve
Electric control valve
Electric control valve
Electric control valve
Electric control valve
+

Electric control valve

DN50-600
600X hydraulic electric control valve is a hydraulic driven valve with solenoid valve as the pilot valve. It relies on the pipeline medium pressure to drive the main valve action, and receives electrical signals to realize remote opening and closing. It can replace the large electric actuator matched with traditional gate valves and butterfly valves, and is widely used for automatic control of Tiktok in water supply systems.Core ParametersCaliber: DN40 to DN800• Nominal pressure: PN10/PN16/PN25 (1.0/1.6/2.5 MPa)• Applicable medium: Clear water• Medium temperature: 0-80 ℃Control voltage: AC220V/DC24V, the pilot valve can be selected as normally open or normally closed typeValve body material: ductile iron/cast iron; Sealing element: rubber soft seal• Connection method: flange connection; Shell and seal pressure test comply with national standardsComponents: main valve, solenoid valve, needle valve, micro filter, pressure gauge, control ball valveUsage scenariosMunicipal water supply network, secondary water supply for high-rise residential buildings, community water supply pump stations, automatic control of water tank inlet, linkage control of water pump outlet, ordinary industrial water supply and drainage pipelines, compatible with PLC, liquid level controller, pressure switch linkage start stop pipeline.Product advantages1. Remote electronic control, adapted to automation, electrical signal control, can be connected to the automatic control system for centralized management;2. The slow opening and closing can be adjusted, and the opening and closing speed can be adjusted through a needle valve, effectively suppressing water hammer and protecting pipelines and water pumps;3. Energy saving, the main valve is driven by water pressure, and only low-power electromagnetic pilot valves consume electricity, which is lower than that of large electric actuators;4. Low flow resistance, large diameter, full channel streamlined valve body, high water delivery efficiency;5. Easy maintenance, with external guide valves, filters, and needle valves, allowing for easy disassembly and maintenance without the need to remove the main valve;6. High reliability, soft sealing structure, good sealing performance after closing, and not easy to leak inside

Email:

lh@sfvalves.cn, sc@sfvalves.cn

WhatsApp:

+8619358036990, +8619358022290

Send Inquiry
Related Product

Contact HENGYA for Shipping, delivery, and payments information.

Products Category

Water Control Valves

Tag list

  • 产品描述

  • 600X hydraulic electric control valve is a hydraulic driven valve with solenoid valve as the pilot valve. It relies on the pipeline medium pressure to drive the main valve action, and receives electrical signals to realize remote opening and closing. It can replace the large electric actuator matched with traditional gate valves and butterfly valves, and is widely used for automatic control of Tiktok in water supply systems.
    Core Parameters
    Caliber: DN40 to DN800
    • Nominal pressure: PN10/PN16/PN25 (1.0/1.6/2.5 MPa)
    • Applicable medium: Clear water
    • Medium temperature: 0-80 ℃
    Control voltage: AC220V/DC24V, the pilot valve can be selected as normally open or normally closed type
    Valve body material: ductile iron/cast iron; Sealing element: rubber soft seal
    • Connection method: flange connection; Shell and seal pressure test comply with national standards
    Components: main valve, solenoid valve, needle valve, micro filter, pressure gauge, control ball valve
    Usage scenarios
    Municipal water supply network, secondary water supply for high-rise residential buildings, community water supply pump stations, automatic control of water tank inlet, linkage control of water pump outlet, ordinary industrial water supply and drainage pipelines, compatible with PLC, liquid level controller, pressure switch linkage start stop pipeline.
    Product advantages
    1. Remote electronic control, adapted to automation, electrical signal control, can be connected to the automatic control system for centralized management;
    2. The slow opening and closing can be adjusted, and the opening and closing speed can be adjusted through a needle valve, effectively suppressing water hammer and protecting pipelines and water pumps;
    3. Energy saving, the main valve is driven by water pressure, and only low-power electromagnetic pilot valves consume electricity, which is lower than that of large electric actuators;
    4. Low flow resistance, large diameter, full channel streamlined valve body, high water delivery efficiency;
    5. Easy maintenance, with external guide valves, filters, and needle valves, allowing for easy disassembly and maintenance without the need to remove the main valve;
    6. High reliability, soft sealing structure, good sealing performance after closing, and not easy to leak inside

Contact Us

Send Email

lh@sfvalves.cn

sc@sfvalves.cn

WhatsApp

+8619358036990

+8619358022290

Phone/Wechat

+86-13932786363

+86-18632765063

Electric control valve

DN50-600
600X hydraulic electric control valve is a hydraulic driven valve with solenoid valve as the pilot valve. It relies on the pipeline medium pressure to drive the main valve action, and receives electrical signals to realize remote opening and closing. It can replace the large electric actuator matched with traditional gate valves and butterfly valves, and is widely used for automatic control of Tiktok in water supply systems.Core ParametersCaliber: DN40 to DN800• Nominal pressure: PN10/PN16/PN25 (1.0/1.6/2.5 MPa)• Applicable medium: Clear water• Medium temperature: 0-80 ℃Control voltage: AC220V/DC24V, the pilot valve can be selected as normally open or normally closed typeValve body material: ductile iron/cast iron; Sealing element: rubber soft seal• Connection method: flange connection; Shell and seal pressure test comply with national standardsComponents: main valve, solenoid valve, needle valve, micro filter, pressure gauge, control ball valveUsage scenariosMunicipal water supply network, secondary water supply for high-rise residential buildings, community water supply pump stations, automatic control of water tank inlet, linkage control of water pump outlet, ordinary industrial water supply and drainage pipelines, compatible with PLC, liquid level controller, pressure switch linkage start stop pipeline.Product advantages1. Remote electronic control, adapted to automation, electrical signal control, can be connected to the automatic control system for centralized management;2. The slow opening and closing can be adjusted, and the opening and closing speed can be adjusted through a needle valve, effectively suppressing water hammer and protecting pipelines and water pumps;3. Energy saving, the main valve is driven by water pressure, and only low-power electromagnetic pilot valves consume electricity, which is lower than that of large electric actuators;4. Low flow resistance, large diameter, full channel streamlined valve body, high water delivery efficiency;5. Easy maintenance, with external guide valves, filters, and needle valves, allowing for easy disassembly and maintenance without the need to remove the main valve;6. High reliability, soft sealing structure, good sealing performance after closing, and not easy to leak inside

Email:

lh@sfvalves.cn, sc@sfvalves.cn

WhatsApp:

+8619358036990, +8619358022290

Send Inquiry
Related Product

Contact HENGYA for Shipping, delivery, and payments information.

Share to

Facebook Linkedin Twitter Tumblr Pinterest

Products Category

Water Control Valves

Tag list

Send Inquiry

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit

Related Products

BS5163 Z45X-Blind rod soft seal gate valve

BS5163 Z45X-Blind rod soft seal gate valve
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More

BS5163 Z45X-Roughly soft seal gate valve

BS5163 Z45X-Roughly soft seal gate valve
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More

BS5163 Z45X-Heavy duty soft seal gate valve

BS5163 Z45X-Heavy duty soft seal gate valve
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More

BS5163 Z41X- Open stem soft seal gate valve

BS5163 Z41X- Open stem soft seal gate valve
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More
< 1234...17 >

Your One Stop, One Solution!

Each optimal solution is determined by its particular application requirements, design, and installation parameters combined with our experience and know-how on valve industry technology.

SUBMIT

CONTACT US

Email: lh@sfvalves.cn, sc@sfvalves.cn

WhatsApp: 8619358036990, 8619358022290

Phone: +86-13932786363, +86-18632765063

Address：No. 4 Road, Industrial Development Zone, Botou City, Hebei Province, China

Facebook Linkedin Twitter Tumblr Pinterest

Business License

Powered by 300.cn | TAG | Privacy Policy | Exhibitions

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT