• Stainless steel ball valve for water meter control
  • Stainless steel ball valve for water meter control
  • Stainless steel ball valve for water meter control
  • Stainless steel ball valve for water meter control
  • Stainless steel ball valve for water meter control
Stainless steel ball valve for water meter control
Stainless steel ball valve for water meter control
Stainless steel ball valve for water meter control
Stainless steel ball valve for water meter control
Stainless steel ball valve for water meter control
+

Stainless steel ball valve for water meter control

DN32-40
Product Introduction: This is a two-piece full bore floating ball electric switch ball valve with an integrated small electric actuator and internal thread connection. It is commonly used for on/off control of water treatment, HVAC, pure water, and ordinary water supply and drainage pipelines. It only has two positions of fully open/fully closed control, supports PLC linkage, comes with a manual emergency knob, and is easy to install.✅  Core parameters• Model: Q911F-16P• Diameter: DN15~DN50 (1/2 "~2")• Nominal pressure: PN16 (1.6MPa)Valve body/core: 304 stainless steelValve seat sealing: PTFE polytetrafluoroethylene• Power supply: DC24V/AC220V optionalControl mode: switch type, passive contact feedback• Protection level: IP65• Working temperature: -20 ℃~150 ℃• Connection method: Internal thread (BSP/NPT)• Media: clean water, hot water, air, weak neutral oil✅  Advantages1. Full diameter, minimal flow resistance, less prone to scaling, and strong flow capacity2. Compact size, threaded installation, no need for flanges, fast construction3. 304 stainless steel is corrosion-resistant and suitable for pure water and HVAC circulating water4. Comes with manual emergency, can be manually switched on and off in case of power failure, safe and reliable5. Simple wiring, no gas source requirements, directly connected to the automatic control system❌  shortcoming1. Only switch function, unable to continuously adjust flow rate2. Soft sealed PTFE is not resistant to strong oxidants and solvents3. Small torque actuators are not suitable for high-pressure differential conditions4. The upper limit of thread pressure is low and not suitable for large-diameter high-pressure pipelines5. PTFE sealing life is shortened under long-term high temperature conditions

Contact HENGYA for Shipping, delivery, and payments information.

Products Category

Tag list

  • 产品描述
  • Product Introduction: This is a two-piece full bore floating ball electric switch ball valve with an integrated small electric actuator and internal thread connection. It is commonly used for on/off control of water treatment, HVAC, pure water, and ordinary water supply and drainage pipelines. It only has two positions of fully open/fully closed control, supports PLC linkage, comes with a manual emergency knob, and is easy to install.

    ✅  Core parameters

    • Model: Q911F-16P

    • Diameter: DN15~DN50 (1/2 "~2")

    • Nominal pressure: PN16 (1.6MPa)

    Valve body/core: 304 stainless steel

    Valve seat sealing: PTFE polytetrafluoroethylene

    • Power supply: DC24V/AC220V optional

    Control mode: switch type, passive contact feedback

    • Protection level: IP65

    • Working temperature: -20 ℃~150 ℃

    • Connection method: Internal thread (BSP/NPT)

    • Media: clean water, hot water, air, weak neutral oil

    ✅  Advantages

    1. Full diameter, minimal flow resistance, less prone to scaling, and strong flow capacity

    2. Compact size, threaded installation, no need for flanges, fast construction

    3. 304 stainless steel is corrosion-resistant and suitable for pure water and HVAC circulating water

    4. Comes with manual emergency, can be manually switched on and off in case of power failure, safe and reliable

    5. Simple wiring, no gas source requirements, directly connected to the automatic control system

    ❌  shortcoming

    1. Only switch function, unable to continuously adjust flow rate

    2. Soft sealed PTFE is not resistant to strong oxidants and solvents

    3. Small torque actuators are not suitable for high-pressure differential conditions

    4. The upper limit of thread pressure is low and not suitable for large-diameter high-pressure pipelines

    5. PTFE sealing life is shortened under long-term high temperature conditions

Stainless steel ball valve for water meter control

DN32-40
Product Introduction: This is a two-piece full bore floating ball electric switch ball valve with an integrated small electric actuator and internal thread connection. It is commonly used for on/off control of water treatment, HVAC, pure water, and ordinary water supply and drainage pipelines. It only has two positions of fully open/fully closed control, supports PLC linkage, comes with a manual emergency knob, and is easy to install.✅  Core parameters• Model: Q911F-16P• Diameter: DN15~DN50 (1/2 "~2")• Nominal pressure: PN16 (1.6MPa)Valve body/core: 304 stainless steelValve seat sealing: PTFE polytetrafluoroethylene• Power supply: DC24V/AC220V optionalControl mode: switch type, passive contact feedback• Protection level: IP65• Working temperature: -20 ℃~150 ℃• Connection method: Internal thread (BSP/NPT)• Media: clean water, hot water, air, weak neutral oil✅  Advantages1. Full diameter, minimal flow resistance, less prone to scaling, and strong flow capacity2. Compact size, threaded installation, no need for flanges, fast construction3. 304 stainless steel is corrosion-resistant and suitable for pure water and HVAC circulating water4. Comes with manual emergency, can be manually switched on and off in case of power failure, safe and reliable5. Simple wiring, no gas source requirements, directly connected to the automatic control system❌  shortcoming1. Only switch function, unable to continuously adjust flow rate2. Soft sealed PTFE is not resistant to strong oxidants and solvents3. Small torque actuators are not suitable for high-pressure differential conditions4. The upper limit of thread pressure is low and not suitable for large-diameter high-pressure pipelines5. PTFE sealing life is shortened under long-term high temperature conditions

Contact HENGYA for Shipping, delivery, and payments information.

Share to

Products Category

Tag list

Send Inquiry

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit

Related Products

Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More
Soft-sealed gate valves are divided into two types: rising stem soft-sealed gate valves and dark stem soft-sealed gate valves.
View Details View More
< 1234...36 >

Request Quote

We will contact you within one working day. Please pay attention to your email.

SUBMIT